Beer Style: Scottish Heavy 70/- (9B)
Recipe Type: extract
Yield: 5 US gallons
This recipe was formulated after looking at many scotch ale recipes (cat's meow, Noonan's book, HBD, etc.) and posting some questions to the digest (#1833). I'd like to thank everyone who has contributed to this great forum we call the HBD, and in particular those who have helped answer questions that I have had.
I've sent this recipe to several people via private email in the past and one of these people (Gabrielle Palmer ) recently posted a question about his version of this brew (in #1960) that has prompted the recent "scottish ale/hoppiness" thread.
Since I have recently entered this brew in a homebrew competition, I've also included the judges comments. BTW, this took first place in the combined english and scottish ale category at the war-of-the-worts homebrew competition sponsored by the Keystone Hops (1/20/96).
- mashed all the grains in 4 qts of 156F water for 1 hr
- sparged with 4 qts of 170F water
- SG of runnings: 1.036 in ~7 qts
- added LME, made volume up to 3 gal, boiled for 1 hr
- chilled with immersion chiller, aerated, made volume up to 5 gal, aerated some more, pitched 1 qt starter
- fermented at 65 - 68F
I use a grain bag from Williams Brewing (800-759-6025) that is made to fit inside a bucket type lauter tun. It also fits perfectly inside my 3 gallon SS kettle.
To do the mash on my stove, I just heat up the mash water to ~165F (in my kettle) then drop in the grain bag containing the crushed grains. Stir real well, let it sit for a minute, then check the temp. If its to low (which it will be) either add small amounts of boiling water (1 cup at a time, stir, let it sit for a minute, then check the temp) or add heat with the stove burner on medium heat while gently stirring constantly. After you hit the mash temp, cover it up and let it sit for 1 hour. At the end of the 1 hour, I lift the grain bag just above the surface of the wort and sparge by pouring the sparge water over the grains gently with a measuring cup.
As you can see, my mash setup/technique is pretty simple and does'nt require a lot of extra equipment. I'm not trying to get the max possible extraction from the grains, only the flavor/body that was missing before I started doing these partial mashes.
Since this setup/technique produces wort that is rather cloudy with grain particles, I've often wondered if it will lead to some astringency in the finished beer. Some of the judges comments (see below) lead me to believe that this does happen. Kirk Fleming asked about this in HBD #1968. Does this stovetop mashing sound similar to what you do?
Source: Jeff McNally
Brown Box Beer Kits make 5 gallons of homebrew and are proudly made from the freshest ingredients available. All Brown Box Beer's kit building ingredients turn over every 7-10 days so there is none of this setting around in a pre-made kit in a box, on a shelf, for who knows how long. All grains are milled at the time your order is filled and shipped. Some substitutions may be made to the original recipe on this page due to ingredient availabilities. Please refer to the box contents on the next page to see what your box will contain.Buy the Kit